Double Knit Is Not a Bad Word

I've noticed that the phrase "double knit" has a bad reputation for some people. They think polyester leisure suits from the 1970s.

But really, double knits don't have to be scary. Double knit simply means that the fabric is knitted on a knitting machine with 2 beds of needles. The fabric has knit stitches visible on both sides and is generally stable. And double knits don't have to be polyester. They can be luxurious wool knitted in a weight suitable for a dress or as a sweater knit.

Way back in June, I said I'd soon post some of the technical knitting details on the fabrics in For Fabricoholics Only for any machine knitters reading. All the knits in that post were a type of double knit. If you're a machine knitter or if you're a fabric lover who's just interested in this type of  machine knitted fabric, please check out today's post on Knitting in the Fastlane, my other blog.

There are a few double knits in the shop now. I'll let you know when more are available.

O!

A Visit to Autumn 2015 - SpinExpo New York

In 1998, I attended an exhibit at the Museum of Modern Art here in NYC entitled Contemporary Japanese Textiles: Structure and Surface. That was my first time seeing "fabric" that had been produced from stainless steel yarn. I was very impressed. The fabric reflected light, but wasn't all glittery or overly shiny like lamé. Now it didn't really drape and I had no idea what I would do with it, but I liked it. Years later, I came across the metal yarns from Habu Textiles - beautiful, but can't be knitted on the machine. I've experimented with the stainless steel/wool blend from Lion Brand, even knitting a vest with it. But Tuesday at SpinExpo I cam across this.

It's from Kyototex, metallic nylon film on rayon. Apparently I'll be able to knit this on a machine! Fabric made from this yarn should not be sewn on a sewing machine, however. I know, I know it kind of looks like a mini chain link fence in my hand, but I have ideas.... O you need some metallic fabric? I can hook you up! ;)

As many of you know, I live in NYC, where there are offices for several yarn producers, but SpinExpo offers something a little different; there are almost 100 international yarn producers and knitting mills represented under the same roof. My goals were to see a few who don't have offices in New York and to attend the trend presentations for fall 2015. Below are a few pics from the event.

Above is the centerfold from the trend area booklet produced in association with Sophie Steller Studio and a number of knitwear manufacturers, yarn producers, showrooms, and a couple of universities, too. Below are some pretty, heathered jersey strips twisted, braided, cabled.

There were lots of brushed yarns. Here are sneakers by Paula Cheng Design with knitted and brushed uppers.

I suppose this one's like gilding the lily -- gold-leafed merino pin tucks.

So many interesting things to see and touch! I have more pics, which I'll post at a later date.

O!

5 Tips for Smooth Sewing of Sweater Knits

I got a question recently from Jodi of My So Charmed Life. Jodi considers herself "a novice sewist," but as you can see from her blog she has solid skills and a wonderful design sense!  "When I try to overcast sweater fabric, it doesn't move and I'm considering getting a walking foot [...]. Can I overcast with walking foot?? Is it designed to accommodate that?" asked Jodi in her email.

As Jodi correctly suspected, a walking foot isn't designed to accommodate overedge stitching. Those two "toes" on the foot are designed to help feed the fabric toward the needle. If you were to overcast using the walking foot, one toe would be totally off the fabric and you'd be losing 50% of the "extra upper feed mojo" (technical term ;) ) that a walking foot provides. Best to use a foot made specifically for overedge stitching. If that doesn't work, there are other things you can try.

Before I had the chance to write this post, Jodi informed me that she had found a solution to get her fabric moving smoothly. She is now zigzaging further away from the cut edge and then trimming close to the stitches. I imagine it's similar to this method, but without the walking foot.

Jodi, I'm so happy to hear and see (She sent pics!) that this is working for you!

Here are some tips for others who may have a similar problem with sweater knits. Some of these methods are scattered around the blog, but now I've compiled a list to help smooth sweater knit sewing, if your fabric stops moving the way Jodi's did.

Tips to Get Sweater Knits Sewing Smoothly on a Sewing Machine

Tip #1.  If you can lessen the pressure of your presser foot, do it! Some low-end and starter machines don't have this option. Many electronic machines have "intelligent sensors" to adjust the pressure for you, so this may not be a possibility.

If you have a mechanical sewing machine, the knob may be on top of the machine (in line with the presser foot). Or perhaps it's on the left side. (Thanks, Brooke! See comment below.)  It may or may not have fixed settings. My machine (Amazon affiliate link) is mechanical and has three fixed levels of pressure. Level "1" gives the least pressure and works like a charm on sweater knits.

Tip #2.  Sew further away from the edge. This is what Jodi did. Even with a special overedge foot, your sweater knit may be too squishy and stretchy for the fabric to feed through easily. Sewing further in from the edge gives the feed dog and whatever foot you're using more territory (fabric) to grab onto. It also lessens the chance of the edge getting stretched out. You won't be able to use your edge foot, and you may need a wider seam allowance. After sewing, just trim close to the stitches.

Tip #3.  Pin a narrow strip of Sulky Super Solvy Water Soluble Stabilizer (Amazon affiliate link) underneath the fabric before sewing. The strip of Solvy will lie between the fabric and the feed dogs, and the fabric will feed through very smoothly. Some people recommend using tissue paper or tear-away stabilizer this way. It works, but you may be left tweezing away bits of paper that get stuck under the stitches when you're done.

This is not just a simple adjustment on the machine. It is more work, and so is the next tip which also uses Super Solvy.

Tip #4.  Follow the Super Solvy Water Soluble instructions for making a solution. Paint on edges. Let dry. (More detailed info can be found here.) This will stabilize the edges of your fabric, temporarily removing all the squishy and stretchy that was giving your machine a hard time. Your fabric will feed right through your sewing machine now and the Super Solvy will come out in the wash.

Tip #5.  Try a stretchy Hong Kong finish. I know I'm always talking about my new favorite edge finish, but this really is my new favorite edge finish!! I love it much more than a serged edge at this point. Try placing the binding on the bottom in Step 2, instead of on top. It may be easier to feed through the machine that way. All other steps would be the same.

I'm pretty sure one of these tips will help someone who wants to sew sweater knits, but who's machine is resisting. If none of these help, read on.

Not really a tip:  Consider another machine. I know that's not practical most of the time, but if you can't find a solution, and you were considering a new or new-to-you machine anyway, and you're planning on sewing lots of sweater knits, it might be something to consider. I own a Singer sewing machine that I bought decades ago, (currently not available to me as it's in storage and out of state). It's not the top of the line, but it sews all sweater knits beautifully, without a walking foot. My last machine, in the same price range as the first, didn't always have enough power for bulky knits and a walking foot was mandatory. No edge stitching with that machine! My current machine, a Janome, works well with sweater knits without a walking foot. (It has a 7-piece feed dog!) I use a walking foot if I'm sewing many layers of bulky knits, which it does with ease. I'm currently lusting after Oonaballoona's Pfaff. I imagine the IDT System to be a dream with all types of crazy, bulky, unstable knits.... Enough fantasizing. Most sewing machines can sew sweater knits! Sometimes they just need a little bit of help.

Like sewing tips? Using a commercial sewing pattern for your sweater? Download Five Tips for Using Commercial Sewing Patterns with Sweater Knits. Newsletter subscribers have access to these tips and more. :)

O!
___
Last edit 18May2018

Project: Wool and Silk

I love holding yarn and imagining the fabric it can become. I'd been holding these yarns for a long time, on and off for years actually -- a variegated merino wool, green (ranging from pale to a warm olive) and a lovely copper-colored silk. Sadly, my sources for these yarns are no longer available. Happily, it meant I could use the yarns to make myself a special fabric. So I knitted a wool jersey, a fancy jersey, with tucks, and I used the reverse side as the public side. The silk yarn became an inlay ("knit-weave" for the any Japanese-style machine knitters reading this) in places totally improvised, and I left a few loose ends. The solid copper patch you see in the upper right corner of the photo below is a reverse jersey of pure silk.

Let's hope that ponchos aren't completely finished by autumn, because as I draped the fabrics around me, imaging what they would become, I imagined a poncho. And that's what I designed and sewed! It's not a true poncho; it has sleeves. But the finished sweater does suggest poncho....

I used the fabric sideways, that is, the selvage is parallel to the floor. I'm assuming the unstretchy silk yarn inlay will keep the fabric from "growing" during wear. We'll see.

The finished garment is both rustic and sophisticated. The shape is asymmetrical. And it's luxuriously soft. Once I figure out exactly how I'm styling this, and when I'm ready to dress in very warm wool, I'll model it and take pics. In the meantime, here's a sneak peek.

O!